0
$\begingroup$

I have bought an esc from atomrc (BLS2in110A2~4S) and can’t work out what the connectors are! Here’s a link to the product: https://atomrc.com/products/atomrc-flying-fish-2in-1-esc?_pos=3&_sid=d68689ecf&_ss=r

The size of the inside is 0.65 centimetres by 0.35 I have tried to email the manufacturer, but they did not understand my question

On the side of the servo connection, it says ‘1’ and ‘MXJ’. If that means anything, please let me know! This connector is 4.25 mills wide

Improve this question
$\endgroup$
2
  • $\begingroup$ Do you mean what model the physical port connectors are, or do you mean what the pin layout/order is? I'm not positive, but based on the photo, the motor connectors look like 3-pin JST-XH connectors. $\endgroup$
    – ifconfig ♦
    Commented Apr 11 at 4:01
  • 1
    $\begingroup$ You should email them directly. The photo is too indistinct to make out the connectors on the board for certain. $\endgroup$
    – Robin Bennett
    Commented Apr 11 at 9:52

1 Answer 1

Reset to default
0
$\begingroup$

For anyone interested, the connectors were JST-Ph 2.0mm 3-Pin Connectors: https://www.amazon.co.uk/gp/product/B09LPXGRLG/ref=ewc_pr_img_1?smid=AOXZIQW4RHZR1&psc=1

And: https://www.ebay.co.uk/itm/232695637343

Improve this answer
$\endgroup$

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.