2
$\begingroup$

So far, I have these parts as all I need for a drone build. Is there anything else that I need or should have?

Is this everything I need to fully complete this build?

$\endgroup$
2
$\begingroup$

This has all of the items needed to build a drone.

  1. Flight Controller
  2. Remote Control and Receiver
  3. Frame
  4. Motors - 4
  5. Electronic Speed Controllers - 4
  6. Propellers - 2 CW, 2 CCW

Assemble it and you will need a battery to fly it. Looking forward to seeing how it turns out!

$\endgroup$
4
  • $\begingroup$ This will be my first DIY drone, I'm excited too! $\endgroup$
    – Proxy303
    Oct 7 '21 at 21:49
  • 1
    $\begingroup$ It might be worth mentioning that this frame has a power distribution board built in, and these ESCs have a 5v BEC built in, while many other frames will need a separate PDB with 5v supply. Also there are little things like a battery plug for the drone, heat shrink tube, velcro and a velcro strap for the battery. And spare props! (and a battery charger?) Does that FC support a lost-model buzzer? $\endgroup$ Oct 8 '21 at 7:50
  • $\begingroup$ I'm not too familiar with building drones, as this is my first one. I would assume a DJI model flight controller would support that, and if it doesn't I could just wire my one extra RC channel (Naza-M takes 5 inputs, but my RX has 6 channel outputs) to a buzzer instead. I do want to put a camera on it, so what type of camera should I use? $\endgroup$
    – Proxy303
    Oct 8 '21 at 11:49
  • $\begingroup$ Sounds like you caught the fever. Already planning mods to the drone ! $\endgroup$
    – Kevin
    Oct 8 '21 at 12:58

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.