3
$\begingroup$

I am looking for a way to access to configuration of Blheli-S firmware running on a Diatone Mamba F30Mini: enter image description here

It seems possible using :

There is explanation on different site about FC Passthrough. This seems to use connection to a Flight Controller. As I am planning to use an Arduino nano to connect to the ESC, I am wondering how to make the connection.

Is it possible to connect more or less to connect the ESC to a PC ? or connecting through the arduino ?

$\endgroup$
2
  • 2
    $\begingroup$ I haven't tried either method because I've always done it through the FC, but the method described in this PDF (flyingmodscom.files.wordpress.com/2017/06/…) and this article (reefwing.medium.com/…) might help you here? $\endgroup$
    – ifconfig
    Apr 22 at 18:18
  • $\begingroup$ @ifconfig Thanks, document seems providing good information. I need to dig into, to understand the ESC side connection, in its documentation there is 8 pins (GND, VCC, motor1-4, Telemetry & Curr) $\endgroup$
    – mpromonet
    Apr 23 at 7:16
3
$\begingroup$

Thanks to informations given by @ifconfig, using BLHeliSuite connecting :

  • GND to Arduino GND
  • ESC1 to Arduino D11

It allow to upload to Arduino the "Arduino Bootloader" enter image description here

Then selecting "ATMEL BLHeli Bootloader (USB/Com)", and go to "ESC Setup" tab enter image description here

Finally quite straight-forward, with a tool that may be more user-friendly.

$\endgroup$

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.