5
$\begingroup$

I ordered this JJRC JJPRO EM-16 2.4GHz 6CH AFHDS 2A Mode 2 RC Transmitter with Receiver Support P175 for RC Drone from banggood, and now I'm trying to figure out what the default settings are and how to program it. I did a bunch of google searches, but I cannot find any sort of manual or user's guide or even a youtube tutorial for this radio online.

Does anybody know where I can find a manual for this radio?

Improve this question
$\endgroup$
5
  • $\begingroup$ Huh. Looks like a highly simplified FlySky FS-i6 clone... $\endgroup$
    – ifconfig ♦
    Commented Oct 16, 2020 at 21:46
  • 2
    $\begingroup$ I wouldn't be surprised if it doesn't actually even have configurable settings. The LCD screen and navigation buttons from the FlySky FS-i6 design have been removed, so I don't know how configuration would wotk anyways. $\endgroup$
    – ifconfig ♦
    Commented Oct 16, 2020 at 21:47
  • 1
    $\begingroup$ If you're lucky there may be some switches for servo reversing and to enable v-tail or elevon mixing hidden in the battery compartment or under a flap somewhere, but otherwise it looks like an ordinary non-programable radio. They're fine, so long as you only fly one model, or trim the model rather than the transmitter - you can just turn servos around to reverse them, and you can buy plug-in mixers that go between the Rx and servos. If you fly multi-rotors, you may never need to upgrade but if you fly planes I'd plan for an upgrade in a year or so. $\endgroup$
    – Robin Bennett
    Commented Oct 20, 2020 at 7:44
  • $\begingroup$ I also bought this receiver and transmitter and struggling to understand channel 1 (thinking it could be PPM?), did you work out how to read it in the end? $\endgroup$
    – Matt Hiscocks
    Commented Apr 11, 2021 at 10:20
  • $\begingroup$ @MattHiscocks, I had a problem with it when I bought mine as well, but I never fixed it. I just switched out ch4 for ch1. You lose ailerons but at least you have a rudder. If you plan on flying for more than a hobby you should probably get a new controller rather than learn bad flight habits by flying on a weird controller. If you do figure out how to fix that, let me know, I definitely want to fix that problem. $\endgroup$
    – Ceramicmrno0b
    Commented Apr 12, 2021 at 10:25

1 Answer 1

Reset to default
4
$\begingroup$

So the radio arrived, and I plugged in some servos and a motor and here's what I think everything is;

Ch1 is rudder, right stick right+left(I think, there was something weird with it)

Ch2 is elevator, right stick up+down

Ch3 was motor, left stick up+down

Ch4 was ailerons, left stick right+left

Ch5 and CH6 were switches

Improve this answer
$\endgroup$

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.