ESC: GEPRC STABLE PRO F7 ESC BL32 2-6S 4in1 Specs:35A BLheli_32 ESC

Steps to connect to BLHeli-Configurator:

  1. Connect to flight control (GEPRC STABLE PRO F7 35A) via mini usb
  2. Connect Lipo Battery to drone
  3. Open BLHeli-Configurator from my Windows 10 laptop
  4. Click Connect on the top right corner of BLheli-Configurator. Note, COMM is being read by the configurator
  5. Click Read Setup on the bottom right corner.
  6. On logs, it states: "2020-06-14 @ 13:30:59 -- Reading setup. 2020-06-14 @ 13:31:00 -- Reading setup finished."
  7. Screen is still blank and can't access the ESC items.

Beta flight is not opened while going through this process. Experienced this on two drones with the same ESC(built two drones in my life).

Trying to change the spin on my motors, any help would be appreciated


1 Answer 1


Try using BLHeliSuite32 instead, since it is a BLHeli_32. I don't think BLHeli configurator works with 32 bit ESC:s, correct me if I'm wrong.

If that does not work, try having Betaflight configurator open WITHOUT connecting. This has helped me sometimes.

If it still does not work, you might need to connect to the ESC without using passthrough (if possible) and try to reflash it with a newer BLHeli_32 version.

  • $\begingroup$ "I don't think BLHeli configurator works with 32 bit ESC:s" — That's correct. :) $\endgroup$
    – ifconfig
    Jun 14, 2020 at 19:12
  • $\begingroup$ That's probably the problem then :) $\endgroup$ Jun 14, 2020 at 19:14
  • $\begingroup$ Really appreciate the clarification. Yes, that worked and was able to reverse the specified motors. Thank you! $\endgroup$
    – DroneDome
    Jun 14, 2020 at 20:14
  • 1
    $\begingroup$ Glad I could help! $\endgroup$ Jun 14, 2020 at 20:17

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.