# DJI FPV Goggles Max Power option not available. Location: USA

I have a set of DJI FPV goggles but cannot change the Max Power option. It shows on the menu under the device section but I cannot select it.

• I am in the USA
• updated to latest firmware: V01.00.0500
• 2S 3000mAh battery
• .txt file on sd card narco_pwr.txt with pwr_2 attribute in txt file

• I have not powered or setup my Caddx Vista.

Max Power is set to 25mW and I cannot change it.

• Have you tried putting a text file called naco.txt in the SD root, containing only the number 1 (to set to US mode?) May 24 '20 at 22:30
• I see you state that you have not powered on or setup your Caddx Vista. Is it possible that you can't change these settings unless the goggles are bound to a powered up vista or air unit? I have not personally tested that yet, but that might be your issue. May 25 '20 at 4:19
• @5zero7rc, yes it is possible that the goggles need to bound with the Vista or air unit. But right now I do not have the supplies to test that, and am trying to get verification if this is so. May 25 '20 at 5:26
• @Kralc, I'm in the US, and it has 8ch, so I believe its already in US mode. But yes, I did add the naco.txt file with 1 within the txt file. May 25 '20 at 5:33